Vol. 78 No. 2 (2023)
Research Articles

Why cassava processors will patronize mechanized cassava peeling machine service

Michael Kwame Asempah
Department of Agricultural Economics, Agribusiness and Extension, Kwame Nkrumah University of Science and Technology, Private Mail Bag, University Post Office, Kumasi
Camillus Abawiera Wongnaa
Department of Agricultural Economics, Agribusiness and Extension, Kwame Nkrumah University of Science and Technology, Private Mail Bag, University Post Office, Kumasi
David Boansi
Department of Agricultural Economics, Agribusiness and Extension, Kwame Nkrumah University of Science and Technology, Private Mail Bag, University Post Office, Kumasi
Emmanuel Abokyi
Consultancy and Innovation Directorate, Ghana Institute of Management and Public Administration (GIMPA), Accra
Nicholas Oppong Mensah
Department of Agribusiness Management and Consumer Studies, University of Energy and Natural Resources, Sunyani

Published 2023-12-31

Keywords

  • cassava peeling machine,
  • cassava processors,
  • Ghana,
  • perception,
  • willingness to pay

How to Cite

Asempah, M. K., Wongnaa, C. A., Boansi, D., Abokyi, E., & Oppong Mensah , N. (2023). Why cassava processors will patronize mechanized cassava peeling machine service. Italian Review of Agricultural Economics (REA), 78(2), 79–96. https://doi.org/10.36253/rea-14436

Abstract

Cassava peeling machines are available but are inaccessible and prohibitively expensive, especially for small-scale processors to acquire. This paper examines the perception and willingness of smallholder cassava processors to pay for cassava peeling machine services using data from 300 cassava processors in the Bono East Region of Ghana. A perception index from a 5-point Likert Scale and Craggs Double Hurdle model were the methods of analysis. The results revealed a perception index of 2.54 and this implies that cassava processors have neutral perception about the cassava peeling machine service. Also, it was found that majority of the processors (75.33%) are not aware of existence of the cassava peeling machine. In addition, we find that 99.63% of the cassava processors are willing to patronize the services of the cassava peeling machine. Moreover, cassava processors are willing to pay an average amount of GH₵ 4.21 for a 50 kg bag of cassava peeled using the services of the cassava peeling machine. Furthermore, the study revealed that factors such as educational level, quantity produced per processing cycle and the dependence on cassava processing as the main source of income positively and significantly influenced willingness to pay for the services. Finally, the amount processors were willing to pay was influenced by educational level, household size, source of income, perception about machines complications and group membership. The study recommends that investors consider installing cassava peeling machines to provide commercial cassava peeling services in processing areas. While generating income to investors, it will contribute to reducing postharvest losses during cassava processing. Future efforts should focus on raising awareness about the availability and benefits of commercialization of mechanized peeling of cassava.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

  1. Abass A., Amaza P., Bachwenkizi B., Wanda K., Agona A., Cromme B. (2017). The impact of mechanized processing of cassava on farmers’ production efficiency in Uganda. Applied Economics Letters, 24: 102-106. DOI: https://doi.org/10.1080/13504851.2016.1167817
  2. Acheampong P.P., Addison M., Wongnaa C.A. (2022). Assessment of impact of adoption of improved cassava varieties on yields in Ghana: An endogenous switching approach. Cogent Economics & Finance, 10(1), 2008587. DOI: https://doi.org/10.1080/23322039.2021.2008587
  3. Adepoju A.O., Oyewole O.O. (2013). Households’ perception and willingness to pay for bread with cassava flour inclusion in Osogbo Metropolis, Osun State, Nigeria. Invited paper presented at the Fourth International Conference of the African Association of Agricultural Economists, 22-25 September, Hammamet, Tunisia. DOI: https://doi.org/10.22004/ag.econ.160285.
  4. Adeleye A.S., Omoghie E.S., Yusuf A.S., Ojedokun C.A., Ibikunle K.Y. (2021). Assessment of cassava processing techniques on the livelihood of agro-forestry farmers in Edo state, Nigeria. Journal of Applied Sciences Environmental Management, 25(2): 189-193. ISSN 1119. DOI: https://doi.org/10.4314/jasem.v25i2.8
  5. Adeyemo A.A. (2013). Strengthening Farmers-Agroprocessor Relationship in Cassava Value Chain: A Case Study of Matna Foods Company and Small-scale Cassava Farmers in Owo LGA of Nigeria, Larenstein University of Applied Sciences,Wageningen, the Netherlands. https://edepot.wur.nl/279048
  6. Adjei E.O., Ayamba B.E., Buri M.M., Biney N., Appiah K. (2023). Soil quality and fertility dynamics under a continuous cassava-maize rotation in the semi-deciduous forest agro-ecological zone of Ghana. Frontiers in Sustainable Food Systems, 7, 1095207. DOI: https://doi.org/10.3389/fsufs.2023.1095207
  7. Aidoo R., Osei Mensah J., Appiah I.B., Aboagye E.T., Assamoah-Cobbinah G., Yirenkyi A.K. (2016). Structure, conduct and performance of the gari market in Mampong and Techiman Municipalities in Ghana. Roots and Tubers in Ghana: Overview and Selected Research Papers, 24.
  8. Alamu E.O., Ntawuruhunga P., Chibwe T., Mukuka I., Chiona M. (2019). Evaluation of cassava processing and utilization at household level in Zambia. Food Security, 11: 141-150. DOI: https://doi.org/10.1007/s12571-018-0875-3.
  9. Amaza P.S., Abass A.B., Bachwenkiz B., Towo E.E. (2016). Adoption of mechanized postharvest cassava processing technologies and the determinants of High-Quality Cassava Flour (HQCF) processing in Tanzania. Tropicultura, 34(4): 411-423. DOI: https://hdl.handle.net/20.500.12478/1497
  10. Amoah F., Bobobee E.Y.H., Addo A., Darko J.O., Akowuah J.O. (2022). A review of mechanical cassava peeling and its adoption by processors. Journal of the Ghana Institution of Engineering, 22: 23-38. DOI: https://doi.org/10.56049/jghie.v22i1.37
  11. Ampah J., Ribeiro J.X.F., Bugyei K.A., Kumi F., Akowuah J.O., Ofori H., Otchere C. (2021). Status, challenges and prospects of food processing equipment fabricators in Ghana. Scientific African, 12, e00843, ISSN 2468-2276. DOI: https://doi.org/10.1016/j.sciaf.2021.e00843.
  12. Ani S.O., Agbubga I.K., Baiyegunhi L.J.S. (2013). Processing and Marketing of Selected Cassava Products in South-east Nigeria. Journal of Economics, 4(2): 105-111. DOI: https://doi.org/10.1080/09765239.2013.11884970
  13. Anning-Dorson T. (2023). Cassava-gari value chain participation and rural women’s wellbeing: an exploratory study. African Journal of Food, Agriculture, Nutrition and Development, 23(1): 22117-22131. https://www.ajol.info/index.php/ajfand/article/view/244987
  14. Asogwa B.C., Ezihe J.A.C, Ater P.I (2013). Socio-economic analysis of cassava marketing in Benue State, Nigeria. International Journal of Innovation and Applied Studies, 2(4): 384-391. http://www.issr-journals.org/ijias/
  15. Bayitse R., Tornyie F., Bjerre A.B. (2017). Cassava cultivation, processing and potential uses in Ghana. Handbook on Cassava. Nova Science Publishers, Inc, 313-333. ISBN: 978-1-53610-291-8
  16. Baidoo I., Amoatey H. (2012). Willingness to Pay for Improvement in the Agricultural Activities of Some Six Selected Villages in West Akim District of Ghana. International Journal of Development and Sustainability, 1(2): 326-337. https://isdsnet.com/ijds-v1n2-20.pdf
  17. Bono East Regional Coordinating Council (BERCC) (2020). Profile of Bono East Region.
  18. Bhatta G.D., Doppler W., Bahadur K.K.C. (2009). Potentials of organic agriculture in Nepal. Journal of Agriculture and Environment, 10: 1-14. DOI: https://doi.org/10.3126/aej.v10i0.2124
  19. Buraimo B., Humphreys B., Simmons R. (2010). Participation and engagement in sport: A double hurdle approach for the United Kingdom. The Selected Works of Dr Babatunde Buraimo. United Kingdom: University of Central Lancashire.
  20. Davies R.M., Olatunji M.O., Burubai W. (2008). A survey of cassava processing machinery in Oyo State. World Journal of Agricultural Sciences, 4(3): 337-340. http://www.idosi.org/wjas/wjas4(3)/9.pdf
  21. Dogan H.P., Aydogdu M.H., Sevinç M.R., Cançelik M. (2020). Farmers’ Willingness to Pay for Services to Ensure Sustainable Agricultural Income in the GAP-Harran Plain¸Sanlıurfa, Turkey, Harran University, Sanlıurfa, Turkey. Agriculture, 10(5), 152. DOI: https://doi.org/10.3390/agriculture10050152.
  22. Diop A., Calverley D.J.B. (1998). Storage and Processing of Roots and Tubers in the Tropics. Food and Agriculture Organization of the United Nations, Agro-industries and Post-Harvest Management Service, Agricultural Support Systems Division.
  23. Dimitri C., Greene C. (2003). Recent growth patterns in the US organic foods market. ERS Agriculture Information Bulletin, 33715. DOI: https://doi.org/10.22004/ag.econ.33715
  24. Ehinmowo O.O., Fatuase A.I. (2016). Adoption of Improved Cassava Processing Technologies by Women Entrepreneur in South – West, Nigeria. World Journal of Agricultural Research, 4(4): 109-113. DOI: https://doi.org/10.12691/wjar-4-4-2
  25. Fonta W.M., Ichoku H.E., Nwosu E.N. (2011). Contingent Valuation in Community Based Project Planning: The Case of Lake Bamendjim Fishery Restocking in Cameroon. African Economic Research Consortium, Nairobi, Kenya.AERC Research Paper 210.
  26. FAOSTAT (2023). FAO Statistics, Food and Agriculture Organization of the United Nations.
  27. Food and Agriculture Organization (FAO) (2015). Food Outlook, Biannual report on global food markets.
  28. Greene W.H. (2012). Econometric Analysis. 7th eds. Upper Saddle River, NJ: Prentice Hall.
  29. Gumanit K., Pugahan J. (2015). Design, fabrication and performance evaluation of an automated combined cassava peeler, grater and presser for small scale processing. Published Doctoral dissertation submitted to the Caraga State University, Philippines.
  30. Gunatilake H., Yang J.-C., Pattanayak S., Choe K.A. (2007). Good practices for estimating reliable willingness-to-pay values in the water supply and sanitation sector: Asian Development Bank, Manila, Philippines.
  31. Gächter S., Nosenzo D., Sefton M. (2013). Peer Effects in Pro-Social Behavior: Social Norms or Social Preferences?. Journal of the European Economic Association, 11(3): 548-573. DOI: https://doi.org/10.1111/jeea.12015.
  32. Hafif B., Pujiharti Y., Yani A., Sjafrina N., Asnawi R., Wibowo N.A., Frediansyah A., Nurida N.L., Dariah A. (2023). Industrial Raw Material on Acid Soil in Indonesia. Cassava - Recent Updates on Food, Feed and Industry. intechopen.com. DOI: https://doi.org/10.5772/intechopen.109709
  33. Heckman J.J. (1979). Sample selection bias as a specification error. Econometrica: Journal of the econometric society, 153-161. DOI: https://doi.org/10.3386/w0172
  34. Jain M., Soni G., Verma D., Baraiya R., Ramtiyal B. (2023). Selection of Technology Acceptance Model for Adoption of Industry 4.0 Technologies in Agri-Fresh Supply Chain. Sustainability, 15(6), 4821. DOI: https://doi.org/10.3390/su15064821.
  35. Kadurumba C.H., Aririguzo J.C. (2021). An Innovative Design and Development of A Cassava Peeling Machine. Nigeria Agricultural Journal, 52(2): 269-276.
  36. Kolawole P.O., Agbetoye L., Ogunlowo S.A. (2010). Sustaining world food security with improved cassava processing technology: The Nigeria experience. Sustainability, 2(12): 3681-3694. DOI: https://doi.org/10.3390/su2123681
  37. Lips M., Burose F. (2012). Repair and Maintenance Costs for Agricultural Machines. International Journal of Agricultural Management, 1(3): 1-7. DOI: https://doi.org/10.22004/ag.econ.149750
  38. Manu I., Mensah-Bonsu A., Anim-Somuah H., Osei-Asare Y.B. (2016). Trust, governance, upgrading and market power in the cassava value chain of southern Ghana. Roots and Tubers in Ghana: Overview and Selected Research Papers, 45.
  39. Mal P., Anik A.R., Bauer S., Schmitz P.M. (2012). Bt Cotton Adoption: A Double-hurdle Approach for North Indian Farmers. AgBioForum 15(3): 294-302. http://hdl.handle.net/10355/35116
  40. Mäler K.G., Vincent J.R. (eds.) (2003). Handbook of environmental economics: valuing environmental changes (Vol. 2). Elsevier.
  41. Martín-Fernández J., del Cura-González M.I., Gómez-Gascón T., Oliva-Moreno J., Domínguez-Bidagor J., Beamud-Lagos M., Pérez-Rivas F.J. (2010). Differences between willingness to pay and willingness to accept for visits by a family physician: a contingent valuation study. BMC Public Health, 10(1): 1-11. DOI: https://doi.org/10.1186/1471-2458-10-236
  42. Mbinda W., Mukami A. (2022). Breeding for postharvest physiological deterioration in cassava: problems and strategies. CABI Agriculture and Bioscience, 3(1): 1-18. DOI: https://doi.org/10.1186/s43170-022-00097-4
  43. Menakashi J.V., Tomlins K.I., Owori C. (2011). Are Consumers in Developing Countries Willing to Pay More for Micronutrient‐Dense Biofortified Foods? Evidence from a Field Experiment in Uganda. American Journal of Agricultural Economics, 93(1): 83-97. DOI: https://doi.org/10.1093/ajae/aaq121
  44. Mensah P. (2017). Performance Evaluation of a Cassava Peeler. Published Thesis Submitted to Kwame Nkrumah University of Science and Technology, Kumasi, Ghana.
  45. Ministry of Food and Agriculture (MoFA) (2021). Facts and Figure, Agriculture in Ghana, Accra, Ghana.
  46. Nwaigwe K.N., Nzediegwu C., Ugwuoke P.E. (2012). Design, construction and performance evaluation of a modified cassava milling machine. Research Journal of Applied Sciences, Engineering and Technology, 4(18): 3354-3362.
  47. Odebode S. (2008). Appropriate Technology for Cassava Processing in Nigeria: User’s Point of View. Journal of International Women’s Studies, 9(3).
  48. Odongo W., Etanny S. (2018). Value chain and marketing margins of cassava: An assessment of cassava marketing in northern Uganda. African Journals Online, 18(1). DOI: http://hdl.handle.net/10355/35116 10.18697/ajfand.81.15955
  49. Okeowo T.A. (2015). Profitability of Cassava Processing in Epe Local Government Area of Lagos State. International Journal of Applied Research and Technology, 4(9): 39-47.
  50. Okoffo E.D., Denkyirah E.D., Adu D.T., Fosu‑Mensah B.Y. (2016). A Double‑Hurdle Model Estimation of Cocoa Farmers’ Willingness to Pay for Crop Insurance in Ghana. Springer Plus, 5. DOI: 10.1186/s40064-016-2561-2.
  51. Osei S. (2020). A Review on the performance of some cassava peeling machines developed. North American Academic Research Journal, 3(02): 97-162. DOI: https://doi.org/10.5281/zenodo.3669373
  52. Otunba-Payne G. (2020). An analysis of the role of women in the cassava value chain in Nigeria. Masters thesis, Cornell University.
  53. Puhani P. (2000). The Heckman correction for sample selection and its critique. Journal of economic surveys, 14(1): 53-68. DOI: https://doi.org/10.1111/1467-6419.00104
  54. Sackey I.S., Bani R.J. (2007). Survey of Waste Management Practices in Cassava Processing to Gari in selected Districts of Ghana, University of Ghana, Legon. Journal of Food, Agriculture and Environment, 5(2): 325-328. DOI: https://doi.org/10.1234/4.2007.1024
  55. Richards P. (2023). Indigenous agricultural revolution: ecology and food production in West Africa (Vol. 21). Taylor & Francis. DOI: https://doi.org/10.4324/9781003383734
  56. Rozi F., Santoso A.B., Mahendri I.G.A.P., Hutapea R.T.P., Wamaer D., Siagian V., Elisabeth D.A.A., Sugiono S., Handoko H., Subagio H., Syam A. (2023). Indonesian market demand patterns for food commodity sources of carbohydrates in facing the global food crisis. Heliyon, 9(6), e16809. DOI: https://doi.org/10.1016/j.heliyon.2023.e16809
  57. Sugri I., Abubakari M., Owusu R.K., Bidzakin J.K. (2021). Postharvest losses and mitigating technologies: evidence from Upper East Region of Ghana. Sustainable Futures, 3, 100048. ISSN 2666-1888. DOI: https://doi.org/10.1016/j.sftr.2021.100048.
  58. Taneja G., Pal B.D., Joshi P.K., Aggarwal P.K., Tyagi N.K. (2014). Farmers preferences for climate-smart agriculture an assessment in the Indo-Gangetic Plain (No. IFPRI Discussion Paper 01337). DOI: https://doi.org/10.1007/978-981-10-8171-2_5
  59. Udensi U.E., Tarawali G., Ndubueze-Ogaraku M.E., Okoye B.C. (2017). Differentials in Adoption of Cassava Post-Harvest Processing Technology among Farmers in South Eastern, Nigeria. Journal of Economics and Sustainable Development, 8(6): 48-54.
  60. Ulimwengu J., Sanyal P. (2011). Joint estimation of farmers’ stated willingness to pay for agricultural services. International Food Policy Research Institute Discussion Paper, 1070. https://ideas.repec.org/p/fpr/ifprid/1070.html
  61. United Nations International Development Organization (UNIDO, 2019). A Value-Chain Analysis of the Cassava Sector in Ghana, Accra, Ghana. DOI: https://doi.org/10.1108/JADEE-05-2019-0066
  62. Waithaka M.M., Thornton P.K., Shepherd K.D., Ndiwa N.N. (2007). Factors affecting the use of fertilizers and manure by smallholders: the case of Vihiga, western Kenya. Nutrient Cycling in Agroecosystems, 78(3): 211-224. DOI https://doi.org/10.1007/s10705-006-9087-x
  63. Wodjao T.B. (2008). A double-hurdle model of computer and internet use in American households. Department of Economics, Western Michigan University, Michigan.
  64. Zainuddin I.M., Lecart B., Sudarmonowati E., Vanderschuren H. (2023). A method for rapid and homogenous initiation of post-harvest physiological deterioration in cassava storage roots identifies Indonesian cultivars with improved shelf-life performance. Plant Methods, 19(1): 1-13. DOI: https://doi.org/10.1186/s13007-022-00977-w